You can clearly see that there is no gap in the strap after cutting. It is an ultra-thick piece of pure natural rubber.
We are comparing a slightly inferior rubber strap. We can find that this strap is made of two thin pieces of rubber with a gap in the middle. This causes the rubber strap to be cold. In the environment, it will be more fragile and prone to cracks.
Here are the details of the bezel. This replica watch and the Sub’s bezel look similar but completely different. In terms of rotation, this outer ring rotates in both directions. The Sub is a unidirectional rotating outer ring. Therefore, the design also needs to fake Rolex be redesigned. However, such a two-way rotation will have a good advantage, that is, because the Sub has a card position, it will cause the bezel to loosen a little, but YMII will not have this situation at all.
The handlebar head is completely set according to the genuine design, and is set at the same time. Allows the fake watch to achieve the same waterproof as the original. Regarding the differences between the physical and the design drawings, you can compare them. The size of the design drawings is already very large. And it is a full-plane design drawing, and everyone can compare it to the original and see the difference.
The movement is equipped with a genuine ETA 2836-2 movement produced by the original Bao Yingnag. The default day difference is the water of the observatory. No need to re-calibrate, the durability is the same as the genuine INAG. This is a super high quality replica watches movement that no seller can provide.